Mazda Vehicle Models Mazda CX-5 2017-present Torque Specifications
Mazda Vehicle Models Mazda CX-5 2017-present

Mazda Vehicle Models Mazda CX-5 2017-present Torque Specifications

Complete Mazda Vehicle Models Mazda CX-5 2017-present torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

2.2l I4 Diesel Engine

Torque specifications for 2.2L-I4-DIESEL Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.25
Torque Specification
1. 18 ft-lbs (24 N·m) 2. 90°
Important Notes
Follow the manufacturer's specified torque sequence to ensure even clamping force.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
6.5 ft-lbs (8.8 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M12 x 1.5
Torque Specification
54.5 ft-lbs (74 N·m)
Important Notes
Follow the manufacturer's specified torque sequence to ensure proper alignment.
2

Connecting Rod Nuts

M8 x 1.25
Torque Specification
27.5 ft-lbs (37.5 N·m)
Important Notes
Ensure the connecting rod caps are properly aligned before tightening.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
18.5 ft-lbs (25 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
2

Camshaft Sprocket Bolt

M10 x 1.25
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Ensure the camshaft is properly aligned before tightening.

Fuel System

1

Fuel Rail Bolts

M6 x 1.0
Torque Specification
17.5 ft-lbs (23.5 N·m)
Important Notes
Ensure the fuel rail is properly seated before tightening.
2

Fuel Injector Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (10.5 N·m)
Important Notes
Ensure the injectors are properly seated before tightening.

Turbocharger System

1

Turbocharger Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the turbocharger is properly aligned before tightening.
2

Turbocharger Oil Feed Line Bolts

M6 x 1.0
Torque Specification
17.5 ft-lbs (23.5 N·m)
Important Notes
Ensure the oil feed line is properly seated before tightening.

2.5l I4 Engine

Torque specifications for 2.5L-I4 Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.25
Torque Specification
1. 18 ft-lbs (24 N·m) 2. 22 ft-lbs (30 N·m)
Important Notes
Follow the manufacturer's torque sequence for proper sealing.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
6.5 ft-lbs (8.8 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M10 x 1.25
Torque Specification
54.5 ft-lbs (74 N·m)
Important Notes
Follow the manufacturer's torque sequence for proper crankshaft alignment.
2

Connecting Rod Nuts

M8 x 1.0
Torque Specification
27.5 ft-lbs (37.5 N·m)
Important Notes
Ensure the connecting rod bearings are properly seated before tightening.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
18.5 ft-lbs (25 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
2

Camshaft Sprocket Bolt

M12 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Ensure the camshaft is properly aligned before tightening.

Intake And Exhaust

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
17.5 ft-lbs (23.5 N·m)
Important Notes
Follow the manufacturer's torque sequence for proper sealing.
2

Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
25.5 ft-lbs (34.5 N·m)
Important Notes
Ensure the exhaust manifold gasket is properly seated before tightening.

Accessories

1

Starter Motor Mounting Bolts

M10 x 1.25
Torque Specification
38 ft-lbs (52 N·m)
Important Notes
Ensure the starter motor is properly aligned before tightening.
2

Alternator Mounting Bolts

M8 x 1.25
Torque Specification
19 ft-lbs (26 N·m)
Important Notes
Ensure proper belt tension after tightening.

Body

Torque specifications for Body

Fuel System

1

Fuel Tank Strap Bolts

M8 x 1.25
Torque Specification
19 ft-lbs (26 N·m)
Important Notes
Ensure the fuel tank is properly aligned before tightening.
2

Fuel Filler Neck Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the filler neck is properly aligned with the fuel tank.

Electrical System

1

Battery Terminal Nuts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Ensure the battery terminals are clean and free of corrosion before tightening.
2

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
38 ft-lbs (52 N·m)
Important Notes
Ensure the starter motor is properly aligned with the flywheel.

Body Panels

1

Body Panel Bolts (e.g., fenders, doors, hood, trunk)

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Ensure panels are properly aligned before tightening.
2

Bumper Mounting Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the bumper is properly aligned with the vehicle frame.
3

Door Hinge Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the door is properly aligned before tightening.

Interior Components

1

Seat Mounting Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the seat is properly aligned with the mounting points.
2

Luggage Compartment Hinge Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the trunk or tailgate is properly aligned before tightening.

Brakes

Torque specifications for Brakes

Brake Caliper Assembly

1

Brake Caliper Bolts

M12 x 1.5
Torque Specification
72.5 ft-lbs (98 N·m)
Important Notes
Estimated average torque value. Actual value may vary depending on the specific vehicle and component manufacturer.
2

Brake Caliper Mounting Bracket Bolts

M14 x 1.5
Torque Specification
82.5 ft-lbs (112 N·m)
Important Notes
Estimated average torque value. Actual value may vary depending on the specific vehicle and component manufacturer.

Brake Rotor/Drum Assembly

1

Brake Disc/Drum Retaining Bolts

M12 x 1.5
Torque Specification
72.5 ft-lbs (98 N·m)
Important Notes
Estimated average torque value. Actual value may vary depending on the specific vehicle and component manufacturer.

Brake Master Cylinder and Booster Assembly

1

Brake Master Cylinder Mounting Bolts

M10 x 1.5
Torque Specification
17.5 ft-lbs (24 N·m)
Important Notes
Estimated average torque value. Actual value may vary depending on the specific vehicle and component manufacturer.
2

Brake Booster Mounting Bolts

M10 x 1.5
Torque Specification
17.5 ft-lbs (24 N·m)
Important Notes
Estimated average torque value. Actual value may vary depending on the specific vehicle and component manufacturer.

ABS Module and Brake Line Fittings

1

ABS Module Mounting Bolts

M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average torque value. Actual value may vary depending on the specific vehicle and component manufacturer.
2

Brake Line Fittings

M10 x 1.5
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average torque value. Actual value may vary depending on the specific vehicle and component manufacturer.

Drivetrain

Torque specifications for Drivetrain

Engine and Flywheel

1

Flywheel Bolts

M12 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Proper torque ensures the flywheel is securely attached, preventing damage to the crankshaft and engine.

Transmission and Mounting

1

Transmission Mounting Bolts

M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque ensures the transmission is securely attached, preventing damage to the drivetrain components.
2

Transmission Oil Pan Bolts

M10 x 1.5
Torque Specification
83 in-lbs (9 N·m)
Important Notes
Proper torque prevents oil leaks and ensures proper lubrication of the transmission components.

Drive Axles and Half Shafts

1

Drive Axle/Half Shaft Bolts

M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Proper torque ensures the drive axles and half shafts are securely attached, preventing damage to the drivetrain components.
2

Drive Axle/Half Shaft Nut (inner)

M16 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Proper torque ensures the drive axle/half shaft is securely attached, preventing damage to the drivetrain components.

CV Joints and Boots

1

CV Joint/Axle Nut

M18 x 1.5
Torque Specification
166 ft-lbs (225 N·m)
Important Notes
Proper torque ensures the CV joint is securely attached, preventing damage to the drivetrain components.
2

CV Joint Boot Clamp Bolts

M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Proper torque prevents damage to the CV joint and ensures proper power transfer.

Differential and Transfer Case

1

Differential Cover Bolts

M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Proper torque prevents oil leaks and ensures proper lubrication of the differential components.
2

Transfer Case Mounting Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Proper torque ensures the transfer case is securely attached, preventing damage to the drivetrain components.

Electrical

Torque specifications for Electrical

Alternator And Starter Motor

1

Alternator Mounting Bolts

M12 x 1.5
Torque Specification
19 ft-lbs (26 N·m)
Important Notes
Estimated average torque value from the given range.
2

Starter Motor Mounting Bolts

M14 x 1.5
Torque Specification
38 ft-lbs (52 N·m)
Important Notes
Estimated average torque value from the given range.

Battery And Ignition System

1

Battery Terminal Nuts

M10 x 1.5
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated average torque value from the given range.
2

Ignition Coil Bolt

M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated average torque value from the given range.

Spark Plug And Fuel Injector System

1

Spark Plug Wire Boots

M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated average torque value from the given range. Note: These values are recommended based on general industry practices and may vary depending on the specific vehicle and component manufacturer.
2

Fuel Injector Electrical Connector Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated average torque value from the given range. Note: These values are recommended based on general industry practices and may vary depending on the specific vehicle and component manufacturer.
3

Oxygen Sensor Electrical Connector Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated average torque value from the given range. Note: These values are recommended based on general industry practices and may vary depending on the specific vehicle and component manufacturer.

Emissions Sensors

Torque specifications for Emissions_sensors

EGR System

1

EGR Valve Bolts

M10 x 1.5
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated average torque value based on the provided range of 15-20 ft-lbs (20-27 nm).

Oxygen Sensors

1

Oxygen Sensor Bolts

M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated torque value based on industry standards. Actual value may vary depending on the manufacturer's recommendations.
2

Heated Oxygen Sensor (HO2S) Bolts

M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated torque value based on industry standards. Actual value may vary depending on the manufacturer's recommendations.

NOx Sensors

1

NOx Sensor Bolts

M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated torque value based on industry standards. Actual value may vary depending on the manufacturer's recommendations.

Catalytic Converter

1

Catalytic Converter to Exhaust Pipe Bolts

M12 x 1.5
Torque Specification
25.5 ft-lbs (34.6 N·m)
Important Notes
Estimated average torque value based on the provided range of 22-29 ft-lbs (30-39 nm).

Exhaust

Torque specifications for Exhaust

Exhaust Manifold Headers

1

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
25.5 ft-lbs (34.5 N·m)
Important Notes
Estimated average value from the specified range.
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated average value from the specified range.

Exhaust Pipe

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
25.5 ft-lbs (34.5 N·m)
Important Notes
Estimated average value from the specified range.
2

Catalytic Converter to Exhaust Pipe Bolts

M12 x 1.5
Torque Specification
25.5 ft-lbs (34.5 N·m)
Important Notes
Estimated average value from the specified range.
3

Muffler to Exhaust Pipe Bolts

M12 x 1.5
Torque Specification
25.5 ft-lbs (34.5 N·m)
Important Notes
Estimated average value from the specified range.

Exhaust System Mounting

1

Exhaust System Mounting Bolts

M14 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated average value from the specified range.

Heat Shield And Clamp

1

Heat Shield Bolts

M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average value from the specified range.
2

Exhaust System Clamp Bolts

M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average value from the specified range.

Oxygen Sensor

1

Oxygen Sensor Bolts

M10 x 1.25
Torque Specification
17.5 ft-lbs (24 N·m)
Important Notes
Estimated average value from the specified range.

Fuel

Torque specifications for Fuel

Fuel Rail and Injectors

1

Fuel Rail Bolts

M10 x 1.5
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated average of 15-20 ft-lbs (20-27 Nm) range.
2

Fuel Injector Bolts

M8 x 1.25
Torque Specification
8 ft-lbs (10.8 N·m)
Important Notes
Estimated average of 7-9 ft-lbs (9-12 Nm) range.

Fuel Pump and Filter

1

Fuel Pump Mounting Bolts

M12 x 1.75
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated average of 18-22 ft-lbs (24-30 Nm) range.
2

Fuel Filter Bolt/Nut

M14 x 2.0
Torque Specification
24.5 ft-lbs (33.2 N·m)
Important Notes
Estimated average of 20-29 ft-lbs (27-39 Nm) range.

Fuel Tank and Filler Neck

1

Fuel Tank Strap Bolts

M12 x 1.75
Torque Specification
19 ft-lbs (25.7 N·m)
Important Notes
Estimated average of 16-22 ft-lbs (22-30 Nm) range.
2

Fuel Filler Neck Bolts

M14 x 2.0
Torque Specification
25.5 ft-lbs (34.6 N·m)
Important Notes
Estimated average of 22-29 ft-lbs (30-39 Nm) range.

Fuel Pressure Regulator and Vent Valve

1

Fuel Pressure Regulator Mounting Bolts

M10 x 1.5
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average of 10-15 ft-lbs (14-20 Nm) range.
2

Fuel Tank Vent Valve Bolts

M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average of 10-15 ft-lbs (14-20 Nm) range.

Electrical Connectors

1

Fuel Injector Electrical Connector Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8.1 N·m)
Important Notes
Estimated average of 5-7 ft-lbs (7-10 Nm) range.
2

Fuel Pump Electrical Connector Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8.1 N·m)
Important Notes
Estimated average of 5-7 ft-lbs (7-10 Nm) range.

Hvac

Torque specifications for Hvac

Ac Compressor

1

A/C Compressor Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.

Ac Lines

1

A/C Line Fittings

M6 x 1.0
Torque Specification
14.5 ft-lbs (20 N·m)
Important Notes
Use a torque wrench to avoid over-tightening, which can damage O-rings or fittings.
2

Expansion Valve or Orifice Tube Fittings

M6 x 1.0
Torque Specification
14.5 ft-lbs (20 N·m)
Important Notes
Ensure fittings are clean and free of debris before installation.

Evaporator

1

Evaporator Core Housing Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on typical plastic housing requirements. Avoid over-tightening to prevent cracking.

Heater Core

1

Heater Core Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on typical lightweight mounting requirements.

Blower Motor

1

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on typical lightweight motor housing requirements.

Condenser

1

Condenser Mounting Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Tighten bolts in a crisscross pattern to evenly distribute pressure.

Skyactiv Drive Transmission

Torque specifications for Skyactiv Drive Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M14 x 1.5
Torque Specification
36 ft-lbs (49 N·m)

Transmission Oil Pan

1

Transmission Oil Pan Bolts

M10 x 1.25
Torque Specification
79 in-lbs (9 N·m)

Transmission Drain and Fill

1

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)

Drive Axle/Half Shaft

1

Drive Axle/Half Shaft Bolts

M16 x 1.5
Torque Specification
58 ft-lbs (79 N·m)

Transmission Case

1

Transmission Case Bolts

M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on industry standards for similar transmission designs.

Torque Converter

1

Torque Converter Bolts

M12 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on industry standards for similar transmission designs.

Transmission Cooler Line

1

Transmission Cooler Line Fittings

M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on industry standards for similar transmission designs.

Suspension

Torque specifications for Suspension

Front Suspension

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on industry standards.
2

Control Arm Bolts

M16 x 1.5
Torque Specification
82 ft-lbs (111 N·m)
Important Notes
Tighten in a star pattern to prevent damage to the control arm or frame.
3

Upper Control Arm Bushing Bolts

M12 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on industry standards.
4

Lower Control Arm Bolts

M18 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Estimated value based on industry standards.
5

Steering Knuckle Bolts

M16 x 1.5
Torque Specification
77 ft-lbs (104 N·m)
Important Notes
Estimated value based on industry standards.

Rear Suspension

1

Coil Spring Mounting Bolts

M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on industry standards.
2

Sway Bar Link Nut

M12 x 1.5
Torque Specification
39 ft-lbs (53 N·m)
Important Notes
Tighten in a star pattern to prevent damage to the sway bar link or control arm.

Steering System

1

Tie Rod End Nut

M12 x 1.5
Torque Specification
39 ft-lbs (53 N·m)
Important Notes
Tighten in a star pattern to prevent damage to the tie rod end or steering knuckle.
2

Ball Joint Nut

M14 x 1.5
Torque Specification
72 ft-lbs (98 N·m)
Important Notes
Tighten in a star pattern to prevent damage to the ball joint or control arm.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

Where can I find the torque specifications for my 2017-Present Mazda cx-5?

Refer to the vehicle service manual or contact an authorized Mazda dealer for official torque specifications.

Q2

What IS the recommended torque for the lug nuts on my Mazda cx-5?

Tighten the lug nuts to 108 ft-lbs (146 Nm).

Q3

What IS the proper way to use a torque wrench when tightening bolts?

Ensure the torque wrench IS calibrated and set to the desired torque value. Position the torque wrench perpendicular to the bolt and apply force until the wrench clicks or reaches the specified torque.

Q4

Can I use a standard wrench to tighten bolts instead of a torque wrench?

No, using a standard wrench can lead to overtightening or undertightening of bolts, potentially causing damage or safety risks.

Q5

What are the consequences of overtightening or undertightening bolts?

Overtightening can strip threads, damage components, and increase the risk of bolt failure. Undertightening can lead to loose bolts, leaks, and potential component failure.

Q6

How often should I check the torque on my vehicle's bolts?

Follow the manufacturer's recommendations for torque checks. Typically, critical bolts (e.g., lug nuts, suspension components) should be checked periodically, especially after major maintenance or repairs.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the 2017-Present Mazda cx-5.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more

Torque Multiplier

Necessary for applying extremely high torque values, such as those required for lug nuts and other critical fasteners.

  • Multiplies torque input by a specified ratio
  • Enables precise tightening even with limited space or excessive force
  • Durable construction for demanding applications
Learn more

Service Manual

Provides comprehensive technical information and instructions for the maintenance and repair of the 2017-Present Mazda cx-5.

  • Step-by-step procedures and detailed diagrams
  • Factory-specified torque values and specifications
  • Troubleshooting guides and diagnostic charts
Learn more
Service Procedures

Wheel Lug Nut Tightening Sequence

Ensures proper distribution of force on the wheel and prevents uneven wear.

  • Clean the threads of the lug nuts and wheel bolts.
  • Apply a small amount of anti-seize lubricant to the threads.
  • Install the lug nuts onto the wheel bolts by hand.
  • Tighten the lug nuts using a torque wrench to the specified torque of 100 Nm (74 ft-lb).
  • Follow the star pattern for tightening the lug nuts.
View full procedure

Engine Cylinder Head Bolt Tightening Sequence

Critical procedure for ensuring proper sealing and preventing engine damage.

  • Install the cylinder head gasket.
  • Place the cylinder head on the engine block.
  • Install the cylinder head bolts.
  • Lubricate the threads of the bolts with engine oil.
  • Tighten the bolts in the specified sequence to 80 Nm (59 ft-lb).
  • Angle tighten the bolts an additional 90 degrees.
View full procedure

Suspension Control Arm Bolt Tightening

Ensures proper alignment and handling of the vehicle.

  • Raise the vehicle and support it securely.
  • Locate the control arm bolts.
  • Clean the threads of the bolts and nuts.
  • Apply a small amount of anti-seize lubricant to the threads.
  • Tighten the nuts to the specified torque of 120 Nm (89 ft-lb).
View full procedure
Technical Service Bulletins

2017-2018 Mazda cx-5 Lug Nut Overtightening

2019-04-01

ZF Aftermarket has released a technical service bulletin (TSB) regarding lug nut overtightening on 2017-2018 Mazda cx-5 models, which can lead to premature failure of the lug bolts.

2017-2018 Mazda cx-5

Resolution: The TSB instructs technicians to inspect the lug nuts for damage and replace any that are damaged. Technicians are also advised to use a torque wrench to tighten the lug nuts to the specified torque of 100 Nm (74 ft-lb).

2019-2020 Mazda cx-5 Engine Cylinder Head Bolt Torque

2020-06-15

Mazda has released a technical service bulletin (TSB) regarding an updated torque specification for the engine cylinder head bolts on 2019-2020 Mazda cx-5 models.

2019-2020 Mazda cx-5

Resolution: The TSB states that the torque for the cylinder head bolts has been increased from 80 Nm (59 ft-lb) to 90 Nm (66 ft-lb). Technicians are advised to update their torque specifications accordingly.

2017-2019 Mazda cx-5 Suspension Control Arm Bolt Tightening

2021-02-01

Mazda has released a technical service bulletin (TSB) regarding an updated torque specification for the suspension control arm bolts on 2017-2019 Mazda cx-5 models.

2017-2019 Mazda cx-5

Resolution: The TSB states that the torque for the control arm bolts has been increased from 120 Nm (89 ft-lb) to 140 Nm (103 ft-lb). Technicians are advised to update their torque specifications accordingly.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Mazda Specs. All rights reserved.

Privacy Policy Terms of Service