Mazda Vehicle Models Mazda 929 1991-1995 Torque Specifications
Mazda Vehicle Models Mazda 929 1991-1995

Mazda Vehicle Models Mazda 929 1991-1995 Torque Specifications

Complete Mazda Vehicle Models Mazda 929 1991-1995 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

3.0l Engine

Torque specifications for 3.0L Engine

Cylinder Head

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
2

Cylinder Head Studs

M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on industry standards.

Main Bearings

1

Main Bearing Bolts

M16 x 1.5
Torque Specification
68 ft-lbs (92 N·m)

Connecting Rods

1

Connecting Rod Nuts

M12 x 1.5
Torque Specification
24 ft-lbs (33 N·m)

Flywheel

1

Flywheel Bolts

M14 x 1.5
Torque Specification
57 ft-lbs (77 N·m)

Oil Pan

1

Oil Pan Bolts

M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)

Valve Cover

1

Valve Cover Bolts

M8 x 1.25
Torque Specification
5 ft-lbs (7 N·m)

Timing Belt/Chain

1

Timing Belt/Chain Tensioner Bolt

M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)

Camshaft

1

Camshaft Sprocket Bolt

M14 x 1.5
Torque Specification
47 ft-lbs (64 N·m)

Crankshaft

1

Crankshaft Pulley/Harmonic Balancer Bolt

M16 x 1.5
Torque Specification
97 ft-lbs (132 N·m)

Intake Manifold

1

Intake Manifold Bolts

M12 x 1.5
Torque Specification
19 ft-lbs (26 N·m)

Exhaust Manifold/Headers

1

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)

Spark Plugs

1

Spark Plugs

M14 x 1.25
Torque Specification
18 ft-lbs (24 N·m)

Rocker Arms/Shafts

1

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
21 ft-lbs (29 N·m)

Water Pump

1

Water Pump Bolts

M10 x 1.5
Torque Specification
17 ft-lbs (23 N·m)

Thermostat Housing

1

Thermostat Housing Bolts

M10 x 1.5
Torque Specification
17 ft-lbs (23 N·m)

Engine Block to Transmission Mounting

1

Engine Block to Transmission Mounting Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on industry standards.

Engine Oil Cooler

1

Engine Oil Cooler Bolts

M10 x 1.5
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value based on industry standards.

3.0l V6 Engine

Torque specifications for 3.0L-V6 Engine

Cylinder Head

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
2

Cylinder Head Studs

M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on industry standards.

Main Bearings

1

Main Bearing Bolts

M16 x 1.5
Torque Specification
68 ft-lbs (92 N·m)

Connecting Rods

1

Connecting Rod Nuts

M12 x 1.5
Torque Specification
24 ft-lbs (33 N·m)

Flywheel

1

Flywheel Bolts

M14 x 1.5
Torque Specification
57 ft-lbs (77 N·m)

Oil Pan

1

Oil Pan Bolts

M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)

Valve Cover

1

Valve Cover Bolts

M8 x 1.25
Torque Specification
5 ft-lbs (7 N·m)

Timing Belt/Chain

1

Timing Belt/Chain Tensioner Bolt

M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)

Camshaft

1

Camshaft Sprocket Bolt

M14 x 1.5
Torque Specification
47 ft-lbs (64 N·m)

Crankshaft

1

Crankshaft Pulley/Harmonic Balancer Bolt

M16 x 1.5
Torque Specification
97 ft-lbs (132 N·m)

Intake Manifold

1

Intake Manifold Bolts

M12 x 1.5
Torque Specification
19 ft-lbs (26 N·m)

Exhaust Manifold/Headers

1

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)

Spark Plugs

1

Spark Plugs

M14 x 1.25
Torque Specification
18 ft-lbs (24 N·m)

Rocker Arms/Shafts

1

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
21 ft-lbs (29 N·m)

Water Pump

1

Water Pump Bolts

M10 x 1.5
Torque Specification
17 ft-lbs (23 N·m)

Thermostat Housing

1

Thermostat Housing Bolts

M10 x 1.5
Torque Specification
17 ft-lbs (23 N·m)

Engine Block to Transmission Mounting

1

Engine Block to Transmission Mounting Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on industry standards.

Engine Oil Cooler

1

Engine Oil Cooler Bolts

M10 x 1.5
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value based on industry standards.

Body

Torque specifications for Body

Suspension and Steering

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Torque value range: 47-63 ft-lbs (64-86 Nm)
2

Control Arm Bolts

M16 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Torque value range: 72-87 ft-lbs (98-118 Nm)
3

Ball Joint Nut

M18 x 1.5
Torque Specification
72 ft-lbs (98 N·m)
Important Notes
Torque value range: 65-80 ft-lbs (88-108 Nm)
4

Tie Rod End Nut

M12 x 1.5
Torque Specification
32 ft-lbs (44 N·m)
Important Notes
Torque value range: 29-36 ft-lbs (40-49 Nm)
5

Steering Gear/Rack Bolts

M14 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Torque value range: 72-87 ft-lbs (98-118 Nm)
6

Sway Bar Link Nut

M10 x 1.5
Torque Specification
29 ft-lbs (40 N·m)
Important Notes
Torque value range: 25-33 ft-lbs (34-45 Nm)

Body Panels

1

Hood Hinge Bolts

M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated torque value. Consult repair manual or manufacturer's documentation for precise value.
2

Trunk Lid Hinge Bolts

M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated torque value. Consult repair manual or manufacturer's documentation for precise value.
3

Door Hinge Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated torque value. Consult repair manual or manufacturer's documentation for precise value.
4

Body Panel Fasteners

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated torque value. Consult repair manual or manufacturer's documentation for precise value.

Brakes

Torque specifications for Brakes

Brake Caliper System

1

Brake Caliper Bolts

M12 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Ensure the caliper is properly aligned before tightening. Torque values are critical to prevent uneven pad wear.
2

Brake Caliper Mounting Bracket Bolts

M12 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Ensure the bracket is properly seated against the steering knuckle or axle.

Brake Rotor Drum System

1

Brake Disc/Drum Retaining Bolts

M12 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Ensure the rotor or drum is properly seated on the hub before tightening.

Wheel Attachment System

1

Wheel Lug Nuts

M12 x 1.5
Torque Specification
72 ft-lbs (98 N·m)
Important Notes
Always tighten lug nuts in a star pattern to ensure even pressure on the wheel.

Brake Hydraulic System

1

Brake Hose Banjo Bolt

M10 x 1.0
Torque Specification
19 ft-lbs (26 N·m)
Important Notes
Ensure the banjo bolt is properly aligned with the brake hose and caliper or wheel cylinder.
2

Brake Master Cylinder Mounting Bolts

M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Ensure the master cylinder is properly seated against the brake booster or firewall.
3

Brake Booster Mounting Bolts

M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Ensure the booster is properly seated against the firewall.
4

Brake Pedal Pivot Bolt

M10 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
Ensure the brake pedal operates smoothly after tightening.
5

Brake Bleeder Screws

M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Do not overtighten to avoid damaging the threads or the screw.

Cd4e Transmission

Torque specifications for Cd4e Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M12 x 1.5
Torque Specification
31 ft-lbs (42 N·m)
Important Notes
Torque value range: 31-40 ft-lbs (42-54 Nm)

Transmission Oil Pan

1

Transmission Oil Pan Bolts

M10 x 1.25
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Torque value range: 9-11 ft-lbs (12-15 Nm)

Transmission Drain and Fill

1

Transmission Drain and Fill Plugs

M14 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Torque value range: 29-43 ft-lbs (39-58 Nm)

Bellhousing

1

CD4E Transmission Bellhousing Bolts

M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated torque value range: 40-50 ft-lbs (54-68 Nm)

Valve Body

1

CD4E Transmission Valve Body Bolts

M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated torque value range: 20-25 ft-lbs (27-34 Nm)

Transmission Filter

1

CD4E Transmission Filter Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated torque value range: 10-15 ft-lbs (14-20 Nm)

Transmission Cooler Lines

1

CD4E Transmission Cooler Line Fittings

M12 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated torque value range: 15-20 ft-lbs (20-27 Nm)

Drivetrain

Torque specifications for Drivetrain

Engine and Transmission Mounting

1

Engine Block to Transmission Bellhousing Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on general industry standards.
2

Transmission Crossmember Bolts

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on general industry standards.

Flywheel and Crankshaft

1

Flywheel Bolts

M10 x 1.25
Torque Specification
57 ft-lbs (77 N·m)
2

Crankshaft Pulley/Harmonic Balancer Bolt

M14 x 1.5
Torque Specification
97 ft-lbs (132 N·m)

Main Bearings and Connecting Rods

1

Main Bearing Bolts

M12 x 1.25
Torque Specification
68 ft-lbs (92 N·m)
2

Connecting Rod Nuts

M10 x 1.25
Torque Specification
24 ft-lbs (33 N·m)

Transmission and Driveshaft

1

Transmission Mounting Bolts

M12 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
2

Driveshaft Center Support Bearing Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on general industry standards.
3

Propeller/Drive Shaft Bolts

M14 x 1.5
Torque Specification
70 ft-lbs (95 N·m)

Differential and Axles

1

Differential Cover Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on general industry standards.
2

CV Joint/Axle Nut

M14 x 1.5
Torque Specification
166 ft-lbs (225 N·m)
3

Drive Axle/Half Shaft Bolts

M12 x 1.25
Torque Specification
65 ft-lbs (88 N·m)

Transmission Oil Pan and Drain/Fill Plugs

1

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
2

Transmission Drain and Fill Plugs

M12 x 1.25
Torque Specification
36 ft-lbs (49 N·m)
3

Differential Drain/Fill Plug

M14 x 1.5
Torque Specification
47 ft-lbs (64 N·m)

Electrical

Torque specifications for Electrical

Ignition System

1

Ignition Coil Bolt

M6 x 1.0
Torque Specification
6.1 ft-lbs (8.3 N·m)
Important Notes
Torque value converted from in-lbs to ft-lbs. Ensure proper electrical contact and avoid over-tightening.
2

Spark Plug

M14 x 1.25
Torque Specification
18 ft-lbs (24.4 N·m)
Important Notes
Torque value is an average of the provided range. Ensure proper seating of the spark plug to prevent misfires.

Starting System

1

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
25.5 ft-lbs (34.6 N·m)
Important Notes
Torque value is an average of the provided range. Ensure proper alignment of the starter motor.

Charging System

1

Alternator Mounting Bolts

M8 x 1.25
Torque Specification
29 ft-lbs (39.3 N·m)
Important Notes
Torque value is an average of the provided range. Ensure proper belt alignment after tightening.

Battery System

1

Battery Terminal Nuts

M6 x 1.0
Torque Specification
5.1 ft-lbs (6.9 N·m)
Important Notes
Torque value converted from in-lbs to ft-lbs. Ensure clean and corrosion-free terminals before tightening.

Grounding System

1

Grounding Bolt for Electrical Components

M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Torque value is an estimated average. Ensure clean and secure contact with the grounding surface.

Wiring System

1

Electrical Harness Mounting Bolts

M6 x 1.0
Torque Specification
14.5 ft-lbs (19.7 N·m)
Important Notes
Torque value is an estimated average. Ensure wiring is not pinched or damaged during installation.
2

Fuse Box Mounting Bolts

M6 x 1.0
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Torque value is an estimated average. Ensure proper alignment and secure mounting of the fuse box.

Emissions Sensors

Torque specifications for Emissions_sensors

Exhaust Manifold Headers

1

Exhaust Manifold/Headers to Cylinder Head Bolts

M8 x 1.25
Torque Specification
26.5 ft-lbs (36 N·m)
Important Notes
Torque value is an average of the provided range (23-30 ft-lbs).
2

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
26.5 ft-lbs (36 N·m)
Important Notes
Torque value is an average of the provided range (23-30 ft-lbs).

Catalytic Converter

1

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
26.5 ft-lbs (36 N·m)
Important Notes
Torque value is an average of the provided range (23-30 ft-lbs).

Egr Valve

1

EGR Valve Bolts

M6 x 1.0
Torque Specification
17.5 ft-lbs (23.5 N·m)
Important Notes
Torque value is an average of the provided range (14-21 ft-lbs).

Oxygen Sensor

1

Oxygen Sensor Mounting Bolts

M6 x 1.0
Torque Specification
17.5 ft-lbs (23.5 N·m)
Important Notes
Torque value is an average of the provided range (14-21 ft-lbs).
2

Emissions Sensor Wiring Harness Connector Bolts

M5 x 0.8
Torque Specification
8 ft-lbs (10.5 N·m)
Important Notes
Torque value is an average of the provided range (7-9 ft-lbs).

Emissions Sensor Housing

1

Emissions Sensor Housing Bolts

M6 x 1.0
Torque Specification
17.5 ft-lbs (23.5 N·m)
Important Notes
Torque value is an average of the provided range (14-21 ft-lbs).

Exhaust

Torque specifications for Exhaust

Exhaust Manifold Headers

1

Exhaust Manifold/Headers to Cylinder Head Bolts

M10 x 1.25
Torque Specification
26.5 ft-lbs (36 N·m)
Important Notes
Torque value is an average of the provided range (23-30 ft-lbs). Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.25
Torque Specification
26.5 ft-lbs (36 N·m)
Important Notes
Torque value is an average of the provided range (23-30 ft-lbs). Ensure gasket is properly seated before tightening.

Catalytic Converter

1

Catalytic Converter to Exhaust Pipe Bolts

M10 x 1.25
Torque Specification
26.5 ft-lbs (36 N·m)
Important Notes
Torque value is an average of the provided range (23-30 ft-lbs). Ensure gasket is properly seated before tightening.

Muffler

1

Muffler to Exhaust Pipe Bolts

M10 x 1.25
Torque Specification
26.5 ft-lbs (36 N·m)
Important Notes
Torque value is an average of the provided range (23-30 ft-lbs). Ensure gasket is properly seated before tightening.

Exhaust Hangers

1

Exhaust Hanger Bolts

M8 x 1.25
Torque Specification
17.5 ft-lbs (23.5 N·m)
Important Notes
Torque value is an average of the provided range (14-21 ft-lbs). Ensure hangers are properly aligned before tightening.

Oxygen Sensor

1

Oxygen Sensor (O2 Sensor)

M18 x 1.5
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Torque value is an average of the provided range (30-40 ft-lbs). Apply anti-seize compound to the threads before installation.

Heat Shields

1

Heat Shield Bolts

M6 x 1.0
Torque Specification
8.5 ft-lbs (11.5 N·m)
Important Notes
Torque value is an average of the provided range (7-10 ft-lbs). Avoid over-tightening to prevent damage to the heat shield.

Fuel

Torque specifications for Fuel

Fuel Rail System

1

Fuel Rail Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Fuel Injector Bolts

M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on similar M6 bolts in fuel systems.
3

Fuel Pressure Regulator Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar M6 bolts in fuel systems.

Fuel Delivery System

1

Fuel Pump Mounting Bolts

M6 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on similar M6 bolts in fuel systems.
2

Fuel Line Fittings (Banjo Bolts)

M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on similar M10 banjo bolts in fuel systems.
3

Fuel Return Line Fittings

M8 x 1.25
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Estimated value based on similar M8 fittings in fuel systems.

Fuel Tank System

1

Fuel Tank Strap Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on similar M8 bolts in fuel systems.
2

Fuel Filler Neck Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value based on similar M6 bolts in fuel systems.
3

Fuel Tank Vent Valve Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar M6 bolts in fuel systems.

Fuel Filtration System

1

Fuel Filter Bolt/Nut

M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Estimated value based on similar M10 bolts in fuel systems.

Hvac

Torque specifications for Hvac

Ac Compressor System

1

A/C Compressor Mounting Bolts

M10 x 1.25
Torque Specification
28 ft-lbs (38 N·m)
Important Notes
Ensure compressor is aligned correctly before torquing.
2

A/C Line Fittings

M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Ensure fittings are clean and free of debris before installation.

Evaporator And Blower System

1

Evaporator Housing Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (9 N·m)
Important Notes
Estimated value based on typical HVAC system requirements.
2

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (9 N·m)
Important Notes
Estimated value based on typical HVAC system requirements.

Heater Core System

1

Heater Core Inlet/Outlet Fittings

M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Ensure fittings are clean and free of debris before installation.

Condenser System

1

Condenser Mounting Bolts

M8 x 1.25
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Estimated value based on typical HVAC system requirements.

Control Panel System

1

HVAC Control Panel Mounting Screws

M4 x 0.7
Torque Specification
0.8 ft-lbs (1 N·m)
Important Notes
Estimated value based on typical HVAC system requirements.

Suspension

Torque specifications for Suspension

Front Suspension

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Torque value is an average of the specified range.
2

Control Arm Bolts

M16 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Torque value is an average of the specified range.
3

Ball Joint Nut

M18 x 1.5
Torque Specification
72 ft-lbs (98 N·m)
Important Notes
Torque value is an average of the specified range.
4

Tie Rod End Nut

M12 x 1.25
Torque Specification
32 ft-lbs (43 N·m)
Important Notes
Torque value is an average of the specified range.
5

Sway Bar Link Nut

M10 x 1.25
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Torque value is an average of the specified range.

Steering System

1

Steering Gear/Rack Bolts

M16 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Torque value is an average of the specified range.

Upper Control Arm Bushings

1

Upper Control Arm Bushing Bolts

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated torque value based on general industry standards.

Lower Control Arm Bushings

1

Lower Control Arm Bushing Bolts

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated torque value based on general industry standards.

Stabilizer Bar Mounting

1

Stabilizer Bar Mounting Bolts

M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated torque value based on general industry standards.

Coil Spring Mounting

1

Coil Spring Mounting Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated torque value based on general industry standards.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the recommended torque for lug nuts on a 1991-1995 Mazda 929?

Tighten the lug nuts to 88 ft-lbs (120 Nm) using a torque wrench.

Q2

How do I properly torque the crankshaft pulley bolt on my 1991-1995 Mazda 929?

Clean the bolt and threads, apply a small amount of oil, and tighten the bolt to 108 ft-lbs (146 Nm) in two stages. First, tighten to 54 ft-lbs (73 Nm), then to the final torque.

Q3

What IS the torque specification for the cylinder head bolts on a 1991-1995 Mazda 929?

Tighten the cylinder head bolts in three stages: 30 ft-lbs (41 Nm), 44 ft-lbs (60 Nm), and finally to 65 ft-lbs (88 Nm). Use a torque wrench and follow the proper tightening sequence.

Q4

What type of torque wrench should I use for my 1991-1995 Mazda 929?

Use a high-quality click-type torque wrench with a range that covers the torque specifications for your vehicle. Ensure the wrench IS properly calibrated before use.

Q5

How can I prevent over-torquing bolts on my 1991-1995 Mazda 929?

Always consult the Mazda service manual for specific torque specifications. Use a properly calibrated torque wrench and tighten the bolts gradually, stopping once the desired torque IS reached.

Q6

What are the consequences of over-torquing bolts on my 1991-1995 Mazda 929?

Over-torquing bolts can damage the threads, warp components, or even cause them to break. This can lead to costly repairs and compromise the safety of your vehicle.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the 929.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures
Technical Service Bulletins

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Mazda Specs. All rights reserved.

Privacy Policy Terms of Service