Mazda Mazda 3 2019-present Body Specifications
Explore the detailed body specifications for the 2019-Present Mazda 3, including dimensions, materials, and design elements. Learn about the vehicle's aerodynamics, weight distribution, and compatibility with aftermarket parts. Perfect for technicians, enthusiasts, and owners.
Overview Specifications
This document provides detailed specifications and technical information about the body design and features of the 2019-Present Mazda 3. It is organized into sections covering dimensions, materials, aerodynamics, and safety features. Use the search functionality to quickly locate specific details or navigate through the sections for a comprehensive understanding of the vehicle's body design.
How to Use
Use the search bar to enter keywords related to the body specifications you are looking for. The results will highlight relevant sections and subsections for quick access.
Scroll through the document or use the table of contents to jump to specific sections. Each section is divided into subsections with detailed technical points for easy reference.
Key Specifications
Length
175.6 inches
Width
70.7 inches
Height
56.9 inches
Wheelbase
107.3 inches
Cargo Volume
13.2 cubic feet
Available Specifications
Dimensions
This section covers the exterior and interior dimensions of the Mazda 3, including length, width, height, wheelbase, and cargo space. These measurements are essential for understanding the vehicle's size and practicality.
Dimensions
This section covers the exterior and interior dimensions of the Mazda 3, including length, width, height, wheelbase, and cargo space. These measurements are essential for understanding the vehicle's size and practicality.
Exterior Dimensions
- Length: 175.6 inches
- Width: 70.7 inches
- Height: 56.9 inches
- Wheelbase: 107.3 inches
- Ground clearance: 5.5 inches
Interior Dimensions
- Headroom (front/rear): 38.0/37.0 inches
- Legroom (front/rear): 42.3/35.1 inches
- Shoulder room (front/rear): 55.7/53.5 inches
- Cargo volume: 13.2 cubic feet
Materials and Construction
This section details the materials used in the Mazda 3's body construction, focusing on lightweight and high-strength components that enhance performance and safety.
Materials and Construction
This section details the materials used in the Mazda 3's body construction, focusing on lightweight and high-strength components that enhance performance and safety.
Body Structure
- Skyactiv-Body architecture for rigidity and lightness
- High-tensile steel used in key areas
- Aluminum hood for weight reduction
- Laser-welded joints for improved durability
Paint and Finish
- Multi-layer paint system for enhanced durability
- Available in premium colors like Soul Red Crystal Metallic
- Anti-chip coating for long-lasting finish
- UV-resistant clear coat
Aerodynamics
This section explains the aerodynamic design features of the Mazda 3, which contribute to improved fuel efficiency and reduced wind noise.
Aerodynamics
This section explains the aerodynamic design features of the Mazda 3, which contribute to improved fuel efficiency and reduced wind noise.
Exterior Design
- Sleek, flowing lines for reduced drag
- Active grille shutters for optimized airflow
- Underbody panels for smoother airflow
- Rear spoiler for improved stability
Wind Tunnel Testing
- Extensive testing for drag coefficient optimization
- Cd value of 0.26 for sedan models
- Cd value of 0.27 for hatchback models
- Reduced wind noise through precise design
Safety Features
This section highlights the safety features integrated into the Mazda 3's body design, ensuring passenger protection and compliance with safety standards.
Safety Features
This section highlights the safety features integrated into the Mazda 3's body design, ensuring passenger protection and compliance with safety standards.
Crash Protection
- Ring structure for impact absorption
- Front and rear crumple zones
- Side-impact door beams
- Advanced airbag system
Driver Assistance
- Blind-spot monitoring system
- Lane-keep assist technology
- Adaptive front-lighting system
- Rear cross-traffic alert
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Overview
- Type
- Unibody
- Configuration
- 4-door sedan or 5-door hatchback
- Platform
- Skyactiv-Vehicle Architecture
- Material
- High-strength steel with aluminum components
- Location
- Manufactured in Japan and Mexico
Dimensions
- Length
- 183.5 in (4661 mm)
- Width
- 70.7 in (1795 mm)
- Height
- 56.9 in (1445 mm)
- Wheelbase
- 107.3 in (2725 mm)
- Curb Weight
- 3000-3200 lbs (1361-1451 kg)
- Ground Clearance
- 5.5 in (140 mm)
- Trunk Capacity
- 13.2 cu ft (374 L) sedan, 20.1 cu ft (569 L) hatchback
Materials
- Frame
- High-strength steel with reinforced joints
- Hood
- Aluminum
- Doors
- Steel with aluminum reinforcements
- Roof
- Steel with optional panoramic glass
- Bumpers
- Polypropylene with energy-absorbing foam
Features
- Exterior
-
- LED headlights with adaptive front lighting
- Power-folding side mirrors
- Rain-sensing windshield wipers
- Dual exhaust system
- interior
-
- 8.8-inch infotainment display
- Leather-wrapped steering wheel
- Dual-zone automatic climate control
- Heated front seats
- Lighting
-
- LED daytime running lights
- LED taillights with signature design
- Interior ambient lighting
- Automatic high-beam control
- Aerodynamics
-
- Active grille shutters
- Underbody paneling
- Rear spoiler (hatchback)
- Windshield wiper de-icer
- Storage
-
- 60/40 split-folding rear seats
- Underfloor storage (hatchback)
- Front seatback pockets
- Center console with sliding armrest
Safety Features
- Structural
-
- Ring-shaped reinforcement structure
- Impact-absorbing crumple zones
- High-strength A-pillars
- Airbags
-
- Dual front airbags
- Side-impact airbags
- Curtain airbags
- Assistance Systems
-
- Blind spot monitoring
- Rear cross-traffic alert
- Smart city brake support
- Visibility
-
- Rearview camera
- Automatic headlight leveling
- Heated side mirrors
Comfort Features
- Seating
-
- 8-way power adjustable driver's seat
- Lumbar support adjustment
- Heated front seats
- Climate
-
- Dual-zone automatic climate control
- Rear seat vents
- Windshield de-icer
- Noise Reduction
-
- Acoustic windshield
- Sound-deadening materials
- Active noise cancellation
- Convenience
-
- Push-button start
- Power windows with one-touch up/down
- Keyless entry
Accessories
- Exterior
-
- Roof rack system
- Rear bumper guard
- Door edge guards
- interior
-
- All-weather floor mats
- Cargo tray
- Seat covers
- Protection
-
- Paint protection film
- Door sill plates
- Windshield sunshade
Maintenance
- Service interval
- Every 7,500 miles or 6 months
- Items
-
- Body panel inspection
- Door hinge lubrication
- Weatherstrip conditioning
- Paint condition check
- Underbody corrosion inspection
- Notes
- Use only Mazda-approved cleaning products for exterior surfaces
Warranty
- Basic
- Years: 3Miles: 36000Coverage: Bumper-to-bumper
- Powertrain
- Years: 5Miles: 60000Coverage: Engine and transmission
- Corrosion
- Years: 5Miles: UnlimitedCoverage: Perforation from corrosion
- Roadside Assistance
- Years: 3Miles: 36000Coverage: 24/7 emergency services
Production Details
- Manufacturer
- Mazda Motor Corporation
- Manufacturing Process
-
- Robotic welding
- E-coat corrosion protection
- Laser brazing
- Precision panel alignment
- Quality Control
- inspection Stages: 12Paint Quality: 7-layer paint systemPanel Gap Tolerance: ±0.5 mm
- Sustainability
-
- Water-based paint system
- Recycled materials in interior
- Energy-efficient manufacturing
- Production Metrics
- Annual Capacity: 300,000 unitsProduction Time: 18 hours per vehicleDefect Rate: Less than 0.5%
Service Information for body Service
Maintenance and service requirements specific to the body components
- Inspect body panels for damage
- Check door and trunk alignment
- Lubricate door hinges and locks
- Inspect weatherstripping
- Check paint condition
Use only Mazda-approved lubricants and cleaning products
- Inspect underbody for corrosion
- Check windshield wiper condition
- Inspect exterior lighting alignment
- Test all door and trunk latches
- Check body panel gaps
Special attention to areas with stone chips or scratches
- Complete body inspection
- Check for paint fading or oxidation
- Inspect all rubber seals and gaskets
- Test all power window mechanisms
- Verify proper drainage channels
Consider professional paint correction if needed
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the technical specifications for the 2019-Present Mazda 3 body?
What are the technical specifications for the 2019-Present Mazda 3 body?
The 2019-Present Mazda 3 features a unibody construction with high-tensile steel for enhanced rigidity and safety. It is compatible with both sedan and hatchback variants, with dimensions varying slightly between models. The body design incorporates Skyactiv technology for improved aerodynamics and fuel efficiency. Compatibility with aftermarket parts depends on the specific model year and trim level. Always refer to the official Mazda documentation for precise specifications.
Q2 What maintenance is required for the Mazda 3 body?
What maintenance is required for the Mazda 3 body?
Regular maintenance for the Mazda 3 body includes washing and waxing to protect the paint, inspecting for rust or damage, and ensuring proper alignment of body panels. Check for loose or damaged trim pieces and address any issues promptly. Mazda recommends a professional inspection every 12 months or 12,000 miles to maintain structural integrity and appearance. Follow the owner's manual for detailed maintenance schedules.
Q3 How do I replace a damaged body panel on the Mazda 3?
How do I replace a damaged body panel on the Mazda 3?
To replace a damaged body panel, first, remove the fasteners securing the panel using appropriate tools. Carefully detach any connected wiring or components. Install the new panel by aligning it correctly and securing it with the original fasteners. Reconnect any wiring or components and ensure proper fitment. For precise instructions, refer to the Mazda 3 service manual or consult a certified technician.
Q4 What should I do if my Mazda 3 body has alignment issues?
What should I do if my Mazda 3 body has alignment issues?
If your Mazda 3 body has alignment issues, inspect for loose or damaged fasteners, worn suspension components, or collision damage. Tighten or replace fasteners as needed and check for proper panel gaps. If the issue persists, consult a professional technician for a detailed inspection and alignment adjustment. Misaligned body panels can affect aerodynamics and safety, so prompt resolution is essential.
Q5 How can I optimize the performance of my Mazda 3 body?
How can I optimize the performance of my Mazda 3 body?
To optimize the Mazda 3 body's performance, ensure proper alignment and aerodynamics by keeping panels and trim securely fastened. Use high-quality cleaning products to maintain the paint and prevent corrosion. Consider aerodynamic accessories like spoilers or diffusers for improved stability. Regularly inspect and address any damage to maintain structural integrity and performance.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Mazda 3 Service Manual
Coming SoonComprehensive guide covering maintenance, repairs, and technical specifications for the 2019-Present Mazda 3.
Mazda 3 Technical Service Bulletin
Coming SoonLatest updates and fixes for common issues related to the Mazda 3 body and other components.
Mazda 3 Parts and Accessories Catalog
Coming SoonDetailed catalog of OEM parts and accessories for the 2019-Present Mazda 3, including body components.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.