Mazda Mazda 3 2014-2018 Body Specifications
Explore the detailed body specifications for the 2014-2018 Mazda 3, including dimensions, materials, and structural design. Ideal for repairs, upgrades, and maintenance.
Overview Specifications
This document provides detailed specifications and information about the body design and features of the 2014-2018 Mazda 3. It is organized into sections covering exterior dimensions, body materials, aerodynamics, and safety features. Use the search functionality to find specific terms or navigate through the sections to explore detailed technical points. This guide is designed to help users understand the key aspects of the Mazda 3's body design and construction.
How to Use
Use the search bar to enter keywords related to body specifications, such as 'dimensions' or 'materials'. The search results will highlight relevant sections and subsections for quick access.
Scroll through the document to explore major sections. Each section contains subsections with detailed technical points. Use the table of contents to jump directly to a specific section or subsection.
Key Specifications
Length
175.6 inches
Width
70.7 inches
Height
57.3 inches
Wheelbase
106.3 inches
Drag Coefficient
0.28
Available Specifications
Exterior Dimensions
This section covers the exterior measurements of the 2014-2018 Mazda 3, including length, width, height, and wheelbase. It also provides details on ground clearance and weight distribution, which are critical for understanding the vehicle's handling and stability.
Exterior Dimensions
This section covers the exterior measurements of the 2014-2018 Mazda 3, including length, width, height, and wheelbase. It also provides details on ground clearance and weight distribution, which are critical for understanding the vehicle's handling and stability.
Overall Dimensions
- Length: 175.6 inches
- Width: 70.7 inches
- Height: 57.3 inches
- Wheelbase: 106.3 inches
- Ground clearance: 6.1 inches
- Curb weight: 2,880 lbs
Weight Distribution
- Front axle weight: 60%
- Rear axle weight: 40%
- Weight distribution optimized for handling
- Lightweight materials used to reduce overall weight
Body Materials
This section details the materials used in the construction of the Mazda 3's body, focusing on lightweight and high-strength components. It also highlights the use of advanced manufacturing techniques to enhance durability and performance.
Body Materials
This section details the materials used in the construction of the Mazda 3's body, focusing on lightweight and high-strength components. It also highlights the use of advanced manufacturing techniques to enhance durability and performance.
Material Composition
- High-strength steel used in key structural areas
- Aluminum components for weight reduction
- Reinforced plastic for non-structural parts
- Corrosion-resistant coatings applied to all metal surfaces
Manufacturing Techniques
- Laser welding for precise joins
- Hydroforming for complex shapes
- Adhesive bonding for added strength
- Modular assembly for improved quality control
Aerodynamics
This section explores the aerodynamic design features of the Mazda 3, including its drag coefficient and airflow management. These elements contribute to fuel efficiency and stability at high speeds.
Aerodynamics
This section explores the aerodynamic design features of the Mazda 3, including its drag coefficient and airflow management. These elements contribute to fuel efficiency and stability at high speeds.
Drag Coefficient
- Drag coefficient: 0.28
- Sleek, streamlined body design
- Active grille shutters for improved airflow
- Underbody panels to reduce turbulence
Airflow Management
- Front air dam to direct airflow
- Rear spoiler for downforce
- Side skirts to minimize drag
- Optimized mirror design for reduced wind noise
Safety Features
This section highlights the safety features integrated into the Mazda 3's body design, including crash protection systems and structural reinforcements. These features ensure passenger safety in various driving conditions.
Safety Features
This section highlights the safety features integrated into the Mazda 3's body design, including crash protection systems and structural reinforcements. These features ensure passenger safety in various driving conditions.
Crash Protection
- High-strength crumple zones
- Reinforced passenger cell
- Side-impact beams in doors
- Energy-absorbing materials in bumpers
Structural Reinforcements
- Ring-shaped body structure for rigidity
- Crossmembers for added stability
- Reinforced roof pillars
- Impact-absorbing steering column
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Overview
- Type
- Unibody
- Configuration
- 4-door sedan or 5-door hatchback
- Platform
- Mazda SKYACTIV-Body
- Material
- High-strength steel
- Location
- Hiroshima, Japan
Dimensions
- Length
- 180.3 inches (4580 mm)
- Width
- 70.7 inches (1795 mm)
- Height
- 57.3 inches (1455 mm)
- Wheelbase
- 106.3 inches (2700 mm)
- Curb Weight
- 2870 lbs (1302 kg)
- Ground Clearance
- 6.1 inches (155 mm)
- Trunk Capacity
- 12.4 cu ft (351 L)
Materials
- Frame
- High-strength steel with reinforced joints
- Hood
- Aluminum alloy
- Doors
- Steel with impact beams
- Roof
- Steel with optional glass panel
- Bumpers
- Thermoplastic with energy-absorbing foam
Features
- Exterior
-
- Aerodynamic design with 0.28 drag coefficient
- LED headlights and taillights
- Power-adjustable side mirrors
- Rain-sensing windshield wipers
- interior
-
- 7-inch touchscreen infotainment system
- Leather-wrapped steering wheel
- Dual-zone automatic climate control
- Heated front seats
- Lighting
-
- Adaptive front lighting system
- LED daytime running lights
- Automatic high-beam control
- Storage
-
- 60/40 split-folding rear seats
- Underfloor storage in hatchback
- Multiple cup holders and compartments
- Technology
-
- Blind-spot monitoring
- Rearview camera
- Smart city brake support
Safety Features
- Structural
-
- Ring-structure reinforcement
- Impact-absorbing crumple zones
- Airbags
-
- Dual front airbags
- Side-impact airbags
- Curtain airbags
- Assistance
-
- Traction control system
- Electronic stability control
- Anti-lock braking system
Comfort Features
- Seating
-
- 8-way power-adjustable driver seat
- Heated front seats
- Rear seat center armrest
- Climate
-
- Dual-zone automatic climate control
- Rear ventilation ducts
- Windshield de-icer
- Noise Reduction
-
- Acoustic windshield
- Sound-deadening materials
- Seal-tight door construction
- Convenience
-
- Keyless entry and start
- Power windows with one-touch up/down
- Auto-dimming rearview mirror
Accessories
- Exterior
-
- Rear spoiler
- Roof rack
- Mud guards
- interior
-
- All-weather floor mats
- Cargo tray
- Seat covers
- Lighting
-
- Fog lights
- LED interior lighting kit
- Puddle lights
Maintenance
- Service interval
- Every 7,500 miles or 6 months
- Items
-
- Inspect body panels for damage
- Check door seals and weatherstripping
- Lubricate door hinges and locks
- Inspect underbody for corrosion
- Clean and condition exterior trim
- Notes
- Regular waxing recommended to protect paint
Warranty
- Basic
- Years: 3Miles: 36000Coverage: Bumper-to-bumper
- Powertrain
- Years: 5Miles: 60000Coverage: Engine and transmission
- Corrosion
- Years: 5Miles: UnlimitedCoverage: Perforation from rust
- Roadside Assistance
- Years: 3Miles: 36000Coverage: 24/7 emergency services
Production Details
- Manufacturer
- Mazda Motor Corporation
- Manufacturing Process
-
- Laser welding
- Hydroforming
- Robotic assembly
- Quality Control
- inspection Stages: 5Testing: Crash testing, Weather resistance, Durability cycles
- Sustainability
-
- Recycled materials in interior
- Water-based paint system
- Energy-efficient production
- Production Metrics
- Annual Capacity: 300000Production Time: 18 hours per vehicleDefect Rate: Less than 0.5%
Service Information for body Service
Maintenance and service requirements specific to the body
- Inspect exterior for damage
- Check door and window seals
- Lubricate hinges and locks
- Clean and condition exterior trim
- Inspect underbody for corrosion
Regular cleaning prevents paint damage
- Detailed exterior cleaning
- Wax application
- Inspect and adjust door alignment
- Check and tighten body fasteners
- Inspect windshield for chips
Use manufacturer-recommended cleaning products
- Full body inspection
- Underbody rust protection treatment
- Replace worn weatherstripping
- Inspect and repair paint chips
- Check and adjust panel gaps
Professional detailing recommended for best results
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the compatibility specifications for the 2014-2018 Mazda 3 body parts?
What are the compatibility specifications for the 2014-2018 Mazda 3 body parts?
The 2014-2018 Mazda 3 body parts are designed to be compatible across all trims and models within this generation. This includes sedan and hatchback variants. However, specific components like bumpers, fenders, and side skirts may vary slightly between trims. Always verify part numbers with your vehicle's VIN to ensure proper fitment. OEM and aftermarket parts are available, but OEM parts are recommended for guaranteed compatibility and quality.
Q2 What is the recommended maintenance schedule for the Mazda 3 body?
What is the recommended maintenance schedule for the Mazda 3 body?
The Mazda 3 body requires regular maintenance to ensure longevity and performance. Inspect the exterior for rust, dents, and paint damage every 6 months. Wash and wax the body every 3 months to protect the paint. Check and clean door seals and hinges annually to prevent wear. For collision repairs, consult a certified technician to maintain structural integrity. Adhering to these guidelines will help preserve the vehicle's appearance and resale value.
Q3 How do I replace a damaged side mirror on a 2014-2018 Mazda 3?
How do I replace a damaged side mirror on a 2014-2018 Mazda 3?
To replace a side mirror, start by removing the interior door panel to access the mirror mounting bolts. Disconnect the electrical connector if the mirror is power-adjustable or heated. Unscrew the mounting bolts and carefully remove the old mirror. Align the new mirror, secure it with bolts, and reconnect the electrical connector. Reattach the door panel and test the mirror's functionality. Always refer to the service manual for detailed instructions and torque specifications.
Q4 What should I do if my Mazda 3's paint is peeling or fading?
What should I do if my Mazda 3's paint is peeling or fading?
If your Mazda 3's paint is peeling or fading, start by washing the affected area thoroughly. Sand the damaged area lightly to remove loose paint and smooth the surface. Apply a primer designed for automotive use, followed by matching paint and clear coat. For extensive damage, consult a professional body shop. Regular waxing and avoiding prolonged sun exposure can prevent future paint issues.
Q5 How can I optimize the aerodynamics and performance of my Mazda 3?
How can I optimize the aerodynamics and performance of my Mazda 3?
To optimize aerodynamics, consider adding a front lip spoiler, rear diffuser, or side skirts designed for the 2014-2018 Mazda 3. These components reduce drag and improve stability at higher speeds. Ensure proper alignment and installation to avoid adverse effects. Additionally, keep the body clean and free of unnecessary accessories that may disrupt airflow. These modifications can enhance fuel efficiency and handling.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
2014-2018 Mazda 3 Service Manual
Coming SoonComprehensive guide covering maintenance, repairs, and technical specifications for the 2014-2018 Mazda 3. Includes detailed diagrams and step-by-step instructions.
Technical Service Bulletin: Paint Durability
Coming SoonDetails common paint issues and recommended solutions for the 2014-2018 Mazda 3. Includes warranty information and repair procedures.
Mazda 3 Parts and Accessories Catalog
Coming SoonOfficial catalog listing OEM parts and accessories for the 2014-2018 Mazda 3. Includes part numbers, descriptions, and compatibility information.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.